End Facer and Chamfer machine

The equipment is used in high-frequency pipe production line. It is used to facing and chamfering the end of the pipe. It adopts mechanical and servo-drive, by electrical control, automatic completion of end-milling mild steel chamfering processes the entire process. The structure of the machine uses double service flat type. It is made up of: power head, power head feeding device, clamping devices, stepper and transferring devices, push-pronged device, electrical control system, and hydraulic system.

The End facer is divided into a left End facer and right End facer. The End facer consists of a main shaft gear box and a feed unit that is connected together. The front end of the Main shaft is equipped with a knives disc, and the main motor is installed at the rear of the End facer. The headstock, the gear, the driven shaft and the lubrication system are installed in the End facer gear box. The End facer gear box and the base are connected by a linear guide pair, and each corner of the End facer gear box is connected by two linear guide sliders. Regularly lubricated with oil.

Positioning →feeding device → driven handling → guide feeding device → guide feeding device drive → drive setting → guide the first group of center rollers (the center of the first group of rollers is adjusted to the pipe diameter) )→driven the end facer disc knife→power corresponding to different pipe diameters→knife head, disc fast→fast end facer box→end faacer box head, end facer head chamfering work→work setting→ Step end facer disc fast retreat device → device knife → guide feeding drive → drive setting group lane → plant setting → stepping box feeding device drive → catheter second disc tray center → roller group device group knife setting knife → The main motor of the knife rotates the headstock, fast forward→fast forward→headbox, pan and pan work into flat head chamfering work→work advance position→bedhead, pan rewind→motorized knife→to the next cycle.

Ø End facer head

This part is the main machine. The motor though pulley, gear drive the main axis. The main axis is installed tool chuck which can install three sets of tool. The tool used to face and chamfer the pipe’s inner and outer. The outer chamfering tool adopts the outer floating structure. The motor is AC motor.

Use HMI Setting the pipe diameter and thickness and other parameters, feeding device control system can adjust forward, reversal distances according to the route, control through the servo setting. When the flat head chamfering forward, the continuous advance device, after the fast step is started, the knife main motor, fast forward, when the set distance is approached, the servo advance is controlled, after the stepping distance (including the working distance of the flat head chamfering), The control retreats, after retreating to the initial position, it stops working and waits for the start of the next cycle.

TUBE MILL FINISHING SECTION

We provides all equipment to tube mill Finishing section:

1. Eddy current machine

2. Seam annealing machine

3. Straightener machine

4. Chamfer and end facer machine

5. Hydro Tester machine

6. Threading machine

7. Painting and oil machine

8. Automatic bundle and package machine

9. Drilling machine

Why Choose Us?

Leading Technology, Reliable Quality, Excellent Service!

Optimized Design, High quality material select! 

Heat treatment process guarantee!

Spiral bevel gear, drum gear coupling and carburization.

Gear teeth quenching.

Driven system stable, efficient and wearable with lower noise.

High precision wear resisting and Long life of rollers.

All the machine Lathes, Key Grooves are positioned and Milled by CNC.