Steel pipe Inner burr remove device

The working principle of Steel pipe Inner burr remove device:

Put the knife rod in the steel pipe.Tool rod fixation plate fixation in the first frame with guide plate rack on the side of the bolt. The location of the circular knife between two outside burr scrafing tools. Impedance device front end is located in the center of squeeze around 20 to 30 mm. Magnet inside have higher pressure cooling water. Use Hex bolt to adjust the roller frame to appropriate height. Start the Tube mill, higher the welding temperature and welding speed as soon as possible. Circular knife cut into the burr within the high temperature of welding steel.

Our Spare Parts Apply:

1.Roller, Mould, Cr12, Cr12Mov material, D2,D3 material

2. Ferrite, Impeder, Fiberglass tube

3. HSS saw blades, TCT Saw blades, Friction saw blades

4. OD burr remove inserts, ID burr remover inserts

5. HF welder Induction Coil and other HF welder spare parts

6. Copper tube for induction Coil, PTFE pipe for Induction Coil

7. Mosfet, Boards

8. Steel pipe Strapping machine

9. Zinc Spray Machine, Zinc wire, Zinc spray gun