Steel Coil Slitting Line

Ⅰ. Technology capability：

Raw material: normal carbon steel, cold rolled steel, galvanized sheet, stainless steel,colored steel plate ,etc. (σs≤350MPa、b≤500MPa )

Specification of raw material:

1. Thickness of steel strip:                        1.0-4.0mm

2. Width of steel strip:                         600-1300mm

3. Inner diameter of strip coil:                Φ508-Φ610mm

4. Outer diameter of strip coil: Max.           Φ2000mm

5. Max quantity of strip coil:                        20T

Production detail:

6. Inner diameter of strip coil:                 Φ508mm-Φ610mm

7. Outer diameter of strip coil:                 MaxΦ2000mm

8. Cut pcs:                                                    Thickness 1.2-2.0mm, Max. 15pcs

                                                             Thickness 4.0mm, Max 6 pcs

9. Production speed:                              Max. 80m/min

10. Input Power:                                   380Volt, 3 phase, 4 lines, 50Hz.

11. Electric installed capacity:                  Appro. 220KW

Ⅱ.The technical flow of mill line:

Coil car and storage→ Uncoiler→shovel board device → Flattening → Shear the ends →Centering device→Disc shear→Two side recoiled → Platform →Locating expanding set→Recoiler→Active support,hold down arm and table→Discharge Coil car

Our Service

Pre-sale service

 1.  We can provide machine running videos for reference

 2.  We will recommend the most suitable equipment according to the needs of customers

 3.  We can provide the layout of the factory

 4.  We welcome customers to visit our factory

After-sales service

1.We will delivery the machine and provide the documents on time to make sure you can get the machine quickly

2.When you finish the Preparation conditions, Our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, And train your employee until they can operate the machine well.

3.We provide one year warranty and life-long technical support.

4.Well-trained & experienced staff are to answer all your inquiries in English and Chinese

5 .24 hours for engineer response.

6.Your business relationship with us will be confidential to any third party.

Quality Control

We have the single quality department, that make sure the material of the raw materials is good, and ensure the machine running smoothly.