This machine is used for the tube mill production line, between the shear welder and host(forming and sizing machine),Its function is in the time since the first roll of strip steel are used up, the next roll strip prepared from uncoiling, shearing and butt welding store enough steel strip to ensure that the host(forming and sizing machine) continuous production.

Solid State High Frequency induction welder

Solid state HF welder to welding the pipe seam, very important machine at ERW tube mill, have 100kw, 200kw, 300kw......1200kw to choose.

Stainless Steel Slitting Production Line

Slitting various kinds of steel plates and recoiling. Uncoiler raw material coil, slitting to narrow strip as require, and finally Recoiler.these Coil will use on ERW Tube mill produce pipe, Cold forming machine and other function.

5" (127mm) x 4mm ERW Tube Mill

Tube is formed in round shape passing through a set of driven and idler rollers of forming section before welding. In welding section tube id longitudinally welded by using high frequency induction welding method. Outside bead is removed and formed in shape of scrap. The weld seam is ironed and tube passes though the cooling section. In sizing section, tube is formed to specified size and converted into specified shape. After sizing, tube is cut to specified size and converted into specified sh

325mm 12 Inch Round ERW Steel Tubing Mill

The proposed tube mill is a combination of equipment installed in a line for the production of High Frequency Induction Welded (HFIW) carbon steel tubes. The process involved is cold forming of carbon steel strip in circular shapes, longitudinal welding, sizing, converting into specified shape and cutting to pre determined length.

Solar Piles produce ERW Tube mill

This machine to produce Solar piles use round ,square and D shape pipes, all sizes within one machine to produce . Machine can produce 165mm, 127mm, 170X170mm, D shape pipes, details welcome inquire more.

запрос

在线询盘 Больше+

联系人 *
手机 *
描述
Разместить

Код проверки

Не может ясно видеть? Изменить один

Отмена

ОК

Содержание консультации：

Вы не добавили ни одного продукта

Присоединяйтесь успешно

продолжать посещать Узнать сейчас

Slitting Lines Metal Processing Machinery - AIS Machinery

графический
подробности

Slitting Lines Metal Processing Machinery - AIS Machinery

Name: Slitting Lines Metal Processing Machinery - AIS Machinery
Rating: 4.8 (91 reviews)

Product Detail

Ⅰ. Technology capability：

Raw material: normal carbon steel, cold rolled steel, galvanized sheet, stainless steel,colored steel plate ,etc. (σs≤350MPa、b≤500MPa )

Specification of raw material:

1. Thickness of steel strip: 1.0-4.0mm

2. Width of steel strip: 600-1300mm

3. Inner diameter of strip coil: Φ508-Φ610mm

4. Outer diameter of strip coil: Max. Φ2000mm

5. Max quantity of strip coil: 20T

Production detail:

6. Inner diameter of strip coil: Φ508mm-Φ610mm

7. Outer diameter of strip coil: MaxΦ2000mm

8. Cut pcs: Thickness 1.2-2.0mm, Max. 15pcs

Thickness 4.0mm, Max 6 pcs

9. Production speed: Max. 80m/min

10. Input Power: 380Volt, 3 phase, 4 lines, 50Hz.

11. Electric installed capacity: Appro. 220KW

Ⅱ.The technical flow of mill line:

Coil car and storage→ Uncoiler→shovel board device → Flattening → Shear the ends →Centering device→Disc shear→Two side recoiled → Platform →Locating expanding set→Recoiler→Active support,hold down arm and table→Discharge Coil car

Our Service

Pre-sale service

1. We can provide machine running videos for reference

2. We will recommend the most suitable equipment according to the needs of customers

3. We can provide the layout of the factory

4. We welcome customers to visit our factory

After-sales service

1.We will delivery the machine and provide the documents on time to make sure you can get the machine quickly

2.When you finish the Preparation conditions, Our fast and professional aftersales service engineer team will go to your factory to install the machine, give you the operating manual, And train your employee until they can operate the machine well.

3.We provide one year warranty and life-long technical support.

4.Well-trained & experienced staff are to answer all your inquiries in English and Chinese

5 .24 hours for engineer response.

6.Your business relationship with us will be confidential to any third party.

Quality Control

We have the single quality department, that make sure the material of the raw materials is good, and ensure the machine running smoothly.

предыдущий : HSS Metal Saw Blade for Cutting Steel Pipe and Tube следующий : Stainless Steel Slitting Production Line

Скопировать ссылку на продукт

Длительно нажмите на картинку, чтобы сохранить / поделиться