HSS Cold Saw Grinding Machinery From AIS Machinery

HSS Circular Saw Blade Automatic Sharpening Machine / CNC Gear Grinding Sharpener Machine Is a Service Machine for The Sharpening of HSS Blade. Consumable Blade Need a Machine Continuous Work for It To Keep Blade Teeth Sharp. So If Your Pipe and Tubes Cutting Off Volume Is Big Which Need a Sharpening Machine to Save Time and Reduce Cutting Cost.

Semi-Automatic Saw Grinding Machine is suitable for HSS, Tungsten Carbide, opening for Friction Saw, Grinding, Chamfering, Pipe and pipe product manufacturing. The machine structure is strong and stable, with a service life of several decades, saving maintenance or replacement costs. Sufficient stock with consumptive parts and can be shipped for customer replacement at any time without wasting time on standby.

The thickness of different saw blades can be accurately adjusted via the gauge.

The feeding speed is adjusted by stepless speed, which can quickly adjust the required speed with the change of the tooth pitch.

Alternate high teeth and low teeth shall be accomplished by one pass. The teeth height difference is variable and read out from indicating meter, thus you got a perfect sharpening result.

1. The standardize and material of abrasive

The diameter of abrasive is 150mm, aperture is 25mm, and the thickness is depending on the type of gear and pitch.

Granule between 60 and 100, hardness is between K and N, use the porcelain sintering abrasive. The resinous and rubber abrasive is just suitable for those which has precision and small pitch of teeth.

2. Usage of clamp cover and protection plate for medium

There are a set of big size and small size abrasive clamp cover, and also a protection plate. When the outside diameter becomes smaller, the small size can take the place of the big one.

The medium protection plate is made of solid and springiness black rubber, which includes fabric yarn. The function of protection plate is to connect abrasive and clamp cover to avoid the broken of abrasive.

If the protection plate is not use, please put it in the shade. It can’t use after 3 years’ using.

Keep clean for clamp cover and core of axis.

3. The test and install of abrasive

You should test before install.

Use a round steel rod knock the abrasive, in normal circumstances, there will be a clear voice.

There can’t be any paper flange in the abrasive, use brass wire brush and water to wash it.

To avoid the deflection, pay attention to the gap between pore size of abrasive and clamp cover, which can’t be too huge. 

Our Spare Parts Apply:

1. Roller, Mould, Cr12, Cr12Mov material, D2,D3 material

2. Ferrite, Impeder, Fiberglass tube

3. HSS saw blades, TCT Saw blades, Friction saw blades

4. OD burr remove inserts, ID burr remover inserts

5. HF welder Induction Coil and other HF welder spare parts

6. Copper tube for induction Coil, PTFE pipe for Induction Coil

7. Mosfet, Boards

8. Steel pipe Strapping machine

9. Zinc Spray Machine, Zinc wire, Zinc spray gun

Why Choose Us?

Leading Technology, Reliable Quality, Excellent Service!

Optimized Design, High quality material select! 

Heat treatment process guarantee!

Spiral bevel gear, drum gear coupling and carburization.

Gear teeth quenching.

Driven system stable, efficient and wearable with lower noise.

High precision wear resisting and Long life of rollers.

All the machine Lathes, Key Grooves are positioned and Milled by CNC.