This machine is used for the tube mill production line, between the shear welder and host(forming and sizing machine),Its function is in the time since the first roll of strip steel are used up, the next roll strip prepared from uncoiling, shearing and butt welding store enough steel strip to ensure that the host(forming and sizing machine) continuous production.

Solid State High Frequency induction welder

Solid state HF welder to welding the pipe seam, very important machine at ERW tube mill, have 100kw, 200kw, 300kw......1200kw to choose.

Stainless Steel Slitting Production Line

Slitting various kinds of steel plates and recoiling. Uncoiler raw material coil, slitting to narrow strip as require, and finally Recoiler.these Coil will use on ERW Tube mill produce pipe, Cold forming machine and other function.

5" (127mm) x 4mm ERW Tube Mill

Tube is formed in round shape passing through a set of driven and idler rollers of forming section before welding. In welding section tube id longitudinally welded by using high frequency induction welding method. Outside bead is removed and formed in shape of scrap. The weld seam is ironed and tube passes though the cooling section. In sizing section, tube is formed to specified size and converted into specified shape. After sizing, tube is cut to specified size and converted into specified sh

325mm 12 Inch Round ERW Steel Tubing Mill

The proposed tube mill is a combination of equipment installed in a line for the production of High Frequency Induction Welded (HFIW) carbon steel tubes. The process involved is cold forming of carbon steel strip in circular shapes, longitudinal welding, sizing, converting into specified shape and cutting to pre determined length.

Solar Piles produce ERW Tube mill

This machine to produce Solar piles use round ,square and D shape pipes, all sizes within one machine to produce . Machine can produce 165mm, 127mm, 170X170mm, D shape pipes, details welcome inquire more.

سؤال

在线询盘 أكثر+

联系人 *
手机 *
描述
إرسال

شيفرة التأكيد

لا تستطيع الرؤية بوضوح؟ تغيير واحد

إلغاء

تحديد

منتجات استشارية：

لم تقم بإضافة أي منتجات！

انضم بنجاح

تواصل الزيارة مطلوب الان

Zinc Spray on Square and Rectangular Pipes Welded seam section

الرسم
تفاصيل

Zinc Spray on Square and Rectangular Pipes Welded seam section

Name: Zinc Spray on Square and Rectangular Pipes Welded seam section
Rating: 5 (98 reviews)

High-speed Arc spray machine is a new developed high-tech product with advantages of high efficiency and low energy consumption. Arc spray is a process which using the electric arc as the heat source that produced by electricity, to make the metal wires melted, then atomization and cooling through compressed air, and spraying the it into fine particles and flying toward the surface of the pretreated work pieces with high speed, to obtain ideal coatings.

Product Detail

Zinc Aluminum thermal metal spray equipment

2. Zinc Spray on Square and Rectangular Pipes Welded seam section Features

The spraying speed of High-speed Electric Arc Spraying Gun particles can reach above 300 m/s. The airflow speed of the spray nozzle can reach about 420 m/s. The coating density is more than double of the ordinary electric spray gun. Porosity < 3%. Spray particle deposition rate > 75%. The adhesive strength of the coating and the pipe surface is high. At the same time, the power supply and control are designed as one whole part, making the equipment more compact. Especially the spray gun adopts remote control air and electrical switches, making operation more convenient, solving the problem that there must be two workers operating at the same time, and realizing the long distance spraying and spraying at heights or spraying inside container. Adopting the safe pressure makes the operation safe and reliable.

2. Zinc Aluminum thermal metal spray equipment Specifications

No.	Contents	Basic parameters
1	Weight of pistol	2.65kg
2	Working pressure for pistol /consumption	≧0.5MPa/1.85m³/min
3	gravitation for wire feeding of spray gun	≧8kg
4	Speed of wire feeding	variable speed
5	Weight of Arcspray machine	120kg
6	Input power supply	380V(three phases)50HZ
7	Output power	4KW
8	Maximum output current	150A
9	Output open circuit voltage	18-27V
10	Duty cycle	100%(when current is 150A)
11	Temperature	85℃
12	Characteristics	Constant-voltage

3. Packing list of Arc Spray Machine

Number	Items	Quantity	Description
1	Arcspray Machine	1
2	Power Cables(35mm²)	2	7.5 meters long
3	Air Pipe (Diameter= Φ16mm)	1	7.5 meters long
4	Air Pipe (Diameter= Φ16mm)	1	10 meters long
5	Reel Carriers for Wire Dispensing	1
6	Plastic Plate	4

Our Spare Parts Apply:

1. Roller, Mould, Cr12, Cr12Mov material, D2,D3 material

2. Ferrite, Impeder, Fiberglass tube

3. HSS saw blades, TCT Saw blades, Friction saw blades

4. OD burr remove inserts, ID burr remover inserts

5. HF welder Induction Coil and other HF welder spare parts

6. Copper tube for induction Coil, PTFE pipe for Induction Coil

7. Mosfet, Boards

8. Steel pipe Strapping machine

9. Zinc Spray Machine, Zinc wire, Zinc spray gun

Why Choose Us?

Leading Technology, Reliable Quality, Excellent Service!

Optimized Design, High quality material select!

Heat treatment process guarantee!

Spiral bevel gear, drum gear coupling and carburization.

Gear teeth quenching.

Driven system stable, efficient and wearable with lower noise.

High precision wear resisting and Long life of rollers.

All the machine Lathes, Key Grooves are positioned and Milled by CNC.

سابق : Roll Set / Die Set /Mould /Mold install in Tube Mill Make Steel Pipe التالي : MOSFET Solid -State High Frequency Induction Heating Welding Machine

انسخ رابط المنتج

اضغط لفترة طويلة على الصورة للحفظ / المشاركة