This machine is used for the tube mill production line, between the shear welder and host(forming and sizing machine),Its function is in the time since the first roll of strip steel are used up, the next roll strip prepared from uncoiling, shearing and butt welding store enough steel strip to ensure that the host(forming and sizing machine) continuous production.

Solid State High Frequency induction welder

Solid state HF welder to welding the pipe seam, very important machine at ERW tube mill, have 100kw, 200kw, 300kw......1200kw to choose.

Stainless Steel Slitting Production Line

Slitting various kinds of steel plates and recoiling. Uncoiler raw material coil, slitting to narrow strip as require, and finally Recoiler.these Coil will use on ERW Tube mill produce pipe, Cold forming machine and other function.

5" (127mm) x 4mm ERW Tube Mill

Tube is formed in round shape passing through a set of driven and idler rollers of forming section before welding. In welding section tube id longitudinally welded by using high frequency induction welding method. Outside bead is removed and formed in shape of scrap. The weld seam is ironed and tube passes though the cooling section. In sizing section, tube is formed to specified size and converted into specified shape. After sizing, tube is cut to specified size and converted into specified sh

325mm 12 Inch Round ERW Steel Tubing Mill

The proposed tube mill is a combination of equipment installed in a line for the production of High Frequency Induction Welded (HFIW) carbon steel tubes. The process involved is cold forming of carbon steel strip in circular shapes, longitudinal welding, sizing, converting into specified shape and cutting to pre determined length.

Solar Piles produce ERW Tube mill

This machine to produce Solar piles use round ,square and D shape pipes, all sizes within one machine to produce . Machine can produce 165mm, 127mm, 170X170mm, D shape pipes, details welcome inquire more.

سؤال

在线询盘 أكثر+

联系人 *
手机 *
描述
إرسال

شيفرة التأكيد

لا تستطيع الرؤية بوضوح؟ تغيير واحد

إلغاء

تحديد

منتجات استشارية：

لم تقم بإضافة أي منتجات！

انضم بنجاح

تواصل الزيارة مطلوب الان

11 rollers Steel Tube straightener Machine

الرسم
تفاصيل

11 rollers Steel Tube straightener Machine

Function: Straighten the pipe straightness to qualified range. rollers rotation to squeeze the pipe to the highly straightness.
When the steel pipe passes through the straightening machine, different pipe diameters can be achieved by changing the inclination angle of the straightening roller.

Product Detail

SPECIFICATIONS:
11-Roll Cross Roll Design
Maximum Diameter: 5″ (127 mm)
Minimum Diameter: 2″ (50.8 mm)
Feed Direction: Left
Roll Size: 200mm
Operating Speed: 60 – 120 MPM

EQUIPPED WITH:
(2) Motors, 37KW, 480 Volt, D.C., No Drive Unit

OVERALL DIMENSIONS:3500M X 2000M
APPROXIMATE WEIGHT: 10TONS

Straightening machine shall be 11 horizontal cross roll type.

Top and bottom rolls driven by 2 motors via gear reducer and universal joint.

All top roll adjustable up / down and angular rotation.

All bottom roll are adjustable angular rotation with center roll additional up / down adjustment.

Quick lift feature available as option for top roll to prevent pipe end dented when pipe entering straightening roller.

Automatic roll setting available as option, this feature allows automatic roll setting during size change based on pipe size, wall thickness and material yield strength. Computer unit shall be provided for roll setting data recording and to be recall during size change.

Heavy duty and quality components ensure reliability.

Function: Straighten the pipe straightness to qualified range.

Structure and work principle: rollers rotation to squeeze the pipe to the highly straigheness.

1. Straightness: 1 in 1000 mm

2. Material: MS Low Carbon Steel & Tubes as per IS 1239

3. Size range: φ21.3-φ127mm

4. Thickness of Tube: Min. 1.5 mm, Max. 6.35 mm

5. Max. Tube Length: 9000mm

6. Speed: 45/90m/min（With AC Motor）

7. Design: 11 Work Roll arrangement

TUBE MILL FINISHING SECTION

We provides all equipment to tube mill Finishing section:

1. Eddy current machine

2. Seam annealing machine

3. Straightener machine

4. Chamfer and end facer machine

5. Hydro Tester machine

6. Threading machine

7. Painting and oil machine

8. Automatic bundle and package machine

9. Drilling machine

Our Machine produce:

a. Round pipe

b. Square and rectangle pipe

c. API standard casing and tubing

d. Solar field pipe

e. Cold forming C,Z,L,U

سابق : Steel Pipe Hydrostatic Testing Machine

انسخ رابط المنتج

اضغط لفترة طويلة على الصورة للحفظ / المشاركة